Playing A Bluetooth Device - Denon Ceol RCD-N9 Owner's Manual

Contents Connections

Playing a Bluetooth device

Check the following before you play back music.
The Bluetooth function of the Bluetooth device must be turned on
0
Pairing must be completed
0
1
Press Bluetooth to switch the input source to
"Bluetooth".
The unit will automatically connect to the most recently used
Bluetooth device.
2
Start playing the Bluetooth device.
The Bluetooth device can also be operated with the remote
0
control of this unit.
Operation buttons
Playback / Pause
1/3
Stop
2
Skip to previous track / Skip to next track
8 9
(Press and hold) Fast-reverse / Fast-forward
6 7
Front/Top
Rear panel
panel
Playback
Function
Remote control unit
Settings
0 When the power of this unit is turned on, the input source will be automatically
switched to "Bluetooth" if a Bluetooth device is connected.
0 When the "Network Control" setting of this unit is set to "On" and a Bluetooth
device is connected with the unit in the standby state, the power of the unit will be
turned on automatically.
0 Press INFO on this unit during playback to switch the display between Title name,
Artist name, Album name, etc.
0 Incompatible characters are displayed as "." (period).
NOTE
0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
60 Index
Tips Appendix