Advertisement
SECONDARY FILTER
FOAM
Electrical Shock Hazard
Do not operate the cleaner without the
motor safety filter. Be sure the tilter is
properlyInstalled to prevent motor fail-
ura and/or electrical shock.
Always unplug power cord from electri-
cal outlet before performing any ser-
vice on vacuum,
Check secondary
filter frequently
and clean
when dirty,
Remove the dust bin as outlined in the
DUST BIN CLEANING section.
Remove secondary
filter from vacuum
cleaner.
Filter
Wash the secondary
filter in warm soapy
water, rinse anddry
thoroughly
by squeez-
ing the filter in your hand and letting it air
dry.
DO NOT wash in the dishwasher.
DO NOT install damp.
Replace dry secondary
filter. Ensure filter is
properly
installed over filter opening.
Replace the dust bin as outlined in the
DUST BIN CLEANING
section.
EXHAUST FILTER
HEPA
The exhaust filter must be replaced when
dirty.
It should be replaced regularly
depending
on use conditions.
The filter CANNOT be washed as it will lose
its dust trapping ability.
NOTE: See PARTS AND FEATURES
for the exhaust filter number.
Press release tab
on filter cartridge
and pull out of
canister. (Cover
not shown for
clarity).
Remove
filter
from cartridge
by
pushing
out
through
the slot in
the cartidge.
TO REPLACE FILTER
Slide new filter into
cartridge
so that
the foam side will
face towards the
canister, as shown.
The filter
should be
placed into the
cartridge
so
that the ,,A.
symbols align.
Replace the
exhaust filter
catridge by plac-
ing tabs in slots
and pushing down
until cartridge
J
snaps into place.
15
Advertisement
