Power Supply - Korg RK-100S Owner's Manual

Precautions
Location
Using the unit in the following locations can result in a
malfunction.
• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
• Close to magnetic fields

Power supply

Please connect the designated AC adapter to an AC outlet
of the correct voltage. Do not connect it to an AC outlet of
voltage other than that for which your unit is intended.
Interference with other electrical
devices
Radios and televisions placed nearby may experience
reception interference. Operate this unit at a suitable
distance from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to the
switches or controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry cloth.
Do not use liquid cleaners such as benzene or thinner, or
cleaning compounds or flammable polishes.
Keep this manual
After reading this manual, please keep it for later reference.
Keeping foreign matter out of your
equipment
Never set any container with liquid in it near this
equipment. If liquid gets into the equipment, it could cause
a breakdown, fire, or electrical shock.
Be careful not to let metal objects get into the equipment.
If something does slip into the equipment, unplug the AC
adapter from the wall outlet. Then contact your nearest Korg
dealer or the store where the equipment was purchased.
DECLARATION OF CONFORMITY (for USA)
Responsible Party : KORG USA INC.
Address : 316 SOUTH SERVICE ROAD, MELVILLE
Telephone : 1-631-390-6500
Equipment Type : Keytar
Model : RK-100S
This device complies with Part 15 of FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference,and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
THE FCC REGULATION WARNING (for USA)
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
If items such as cables are included with this equipment, you
must use those included items.
Unauthorized changes or modification to this system can void
the user's authority to operate this equipment.
Notice regarding disposal (EU only)
When this "crossed-out wheeled bin" symbol is
displayed on the product, owner's manual, battery, or
battery package, it signifies that when you wish to
dispose of this product, manual, package or battery
you must do so in an approved manner. Do not discard
this product, manual, package or battery along with
ordinary household waste. Disposing in the correct
manner will prevent harm to human health and
potential damage to the environment. Since the correct method
of disposal will depend on the applicable laws and regulations
in your locality, please contact your local administrative body
for details. If the battery contains heavy metals in excess of the
regulated amount, a chemical symbol is displayed below the
"crossed-out wheeled bin" symbol on the battery or battery
package.
Precautions for the RK-100S
As with a common electric guitar, the body of this device
is made with painted wood.
• After use, wipe the body with a clean, soft and dry cloth.
Use a commercially available guitar polish.
• Do not expose this device to rapid temperature changes,
such as extremely high or low temperatures. Bringing the
device from a cold location directly to a heated room may
cause cracks to form in the painted body. In addition, it
is extremely dangerous to leave the device in the trunk
of a car, where it will be exposed to high temperatures,
for example, in the summer.
• Since the body paint is delicate, even a slight shock may
cause it to peel off or crack. While playing or transporting,
handle the device very carefully to avoid hitting it.
* All product names and company names are the
trademarks or registered trademarks of their respective
owners.
Precautions
3