Connecting; Connecting To A Device - JVC PK-VS4GD3G Instructions Manual

Connecting

Connecting to a Device

Connect the device in the way as shown in the connection example below.
Do not turn on the power until all connections are made.
For details on the devices that can be connected to this unit, connection method and operation, please consult your authorized
dealer.
Refer to page 13 when mounting the rack.
When connecting to Projector (DLA-VS2200/DLA-VS2000)
To DVI terminal
Video source
Optical Fiber Cable
EF-FC1150G
(sold separately)
DC IN 12V
LAN
* To control using the computer, connect to any one of the terminals (RS-232C, LAN or USB). Do not use the terminals at the
same time.
DVI-D cable (sold separately)
OPT
3 4
DVI-D
(Dual link)
1 2
USB OPT
DVI 1 OUT DVI 2 OUT
HDMI-DVI conversion cable (sold separately)
Transmitter Unit (PK-EXT40TG)
(sold separately)
100
l
240
VAC
RS-232C cross cable
or LAN, USB Cable
(sold separately)
REMOTE EXT. CONTROL
DVI 3 OUT
Projector (DLA-VS2200/DLA-VS2000) Max 4 units
Computer
To RS-232C or LAN,
USB terminal *
SYNC
IN
DVI 4 OUT
To HDMI terminal
11