Oki OKIPAGE 12i Service Handbook page 86

b. Setting
Example: Method for setting the parameter to 19 (for a case where the previous parameter
setting was 8).
Operation
Turn the POWER switch
on while holding the
FORM FEED and ENTER
keys down.
Press the MENU key
Press or
is displayed.
Press the ENTER key
The printer is booted with
selected setting by pressing
ON LINE key.
XXX: HP4, Auto, Adobe PS or HEX
HEX DUMP
key, until "19"
4 - 6
LCD display after operation
ENG MNT
LED HEAD Displays previous
No. 8 * parameter No.
LED HEAD
No. 19
Parameter 19 is
LED HEAD
set to EEPROM
No. 19 *
(* is displayed on
LCD)
ON-LINE
XXX