Advertisement
Available languages
Available languages
Always
follow all safety precautions
when
cleaning
and servicing
the vacuum
cleaner.
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injuryfrom cleaner
suddenly starting.
If the cleaner
does not seem to have ade-
quate suction,
first check
if the dust bag is
full or if a filter is clogged.
See DUST
BAG CHANGING
and FILTER CHANG-
ING.
If the bag and filter areas
are free of
clogs, check the hose area. Remove
the
lower end of the stretch
hose from the
cleaner
by grasping
the hose collar, twist-
ing, and pulling straight
out.
Stretch
Hose In
and Out
Plug in the
vacuum
and
turn it on.
Stretch
the
hose to
maximum
length
and
then allow
the hose to
return to its
storage
length.
Turn the unit
off and
unplug the
unit.
Visually
inspect
the hose and the base
area into which the hose is inserted.
Remove any visible clog.
Re-insert
the hose into the opening
on
the lower body from which it was
removed.
Press firmly to assure
connection.
- Stretch
Hose
Hose
Collar
WARNING
Personal Injury Hazard
DO NOT place hands or feet under-
neath the unit at any time. The agita-
tor will be revolving rapidly when the
vacuum is turned on and is in the
carpet setting.
If the bag and filter areas and the hose
areas are free of clogs, check the nozzle
area. To check this area, see the section
on BELT CHANGING
AND AGITATOR
CLEANING.
Return the cleaner
to the upright
position
before
plugging
into an electrical
outlet.
19
Advertisement
