What Happens During System Setup - Control 4 RCZ-SRC1-B User Manual

What Happens During System
Setup
When a Control4 home automation system is set up, the
following general activities occur:
1. Each Control4 controller (such as Media Controller)
comes with a Director software project pre-installed.
2. During setup, a trained installer modifies the Director
project for the specific site (such as “"Media Controller-
Smith Family”"): Using specialized setup software (such
as Composer Pro installed on a connected PC), the
trained installer performs these tasks:
a. Adds rooms to the Director project.
b. Adds devices to specific rooms in the Director
project.
c. Physically connects devices to the controller
and to each other as needed.
d. Identifies individual devices using button pushes
when appropriate. This allows each device to be
recognized by the Director project and by the
other devices as needed. For example, when
Composer Pro is ready to recognize the remote
control, press
6
(the red Control4 button).