Scan For A Home Network To Extend - Amped Wireless TAP-EX User Manual

TAP-EX USER'S GUIDE

Scan for a Home Network to Extend

Highlight and select the Wi-Fi network that you wish to
extend and click Next to continue. Check that your Wi-
Fi Network has a signal strength of 70% or greater.
If you fail to find any Wi-Fi networks, or your signal
strength is below 70%, the Range Extender may be
placed too far from the Wi-Fi network that you are
trying to extend. Move your Range Extender closer to
the Wi-Fi router of the network that you are trying to
extend and click Rescan.
The Scan results page will display information
regarding the name of the network (SSID), the channel
which the Wi-Fi network is operating on and the
security type of the network. The results page will also
display what the signal strength is coming from each specific network detected.
41