Table of Contents
Advertisement
TAP-EX
b. The Range Extender automatically reconfigures itself in the event of a channel change on your router.
However, in the case that it does not, check to see that your home Wi-Fi router settings have not
changed. Any changes to the SSID, security, or channel number from the original settings will disconnect
the Range Extender's connection to the home network. A power outage can cause a change in the
channel of your router. To solve this simply run the Setup Wizard again from the Touch Screen Menu
and reconfigure your Home Network connection. You can also set a static channel number on your
router to prevent this from happening again in the future.
c.
Check to see that your home Wi-Fi router is still on. If it has been turned off please turn it back on. The
Range Extender should automatically reconnect to your Home Network within 10 minutes.
d. If the range extender does not automatically reconnect, try rebooting the Range Extender by
unplugging the power cable and plugging it back in.
I have a dual-band router and I cannot extend it.
a.
Log into the Web Menu for your dual-band Wi-Fi router and adjust the Wi-Fi settings. Change the Wi-
Fi band to 2.4GHz single band mode only. The Range Extender will not be able to extend the 5GHz band.
USER'S GUIDE
79
Advertisement
Table of Contents
