Denon CDR-M30 Operating Instructions Manual page 11

4. Stopping playback temporarily __.._.._.._...._.............,,...........................................,....,,....., m
Use rh~s fwmon to stop playback tempmar~ly then resume from the *ame point
5. Playing tracks in a certain order hnote control unit only) __....__..._._..___........... Programmed Playback
1
Press the funcilon butter and Select CD-R
I2
In rhe slop mode. press the PROGiDlRECT button
. The "PROG" Indicator lights
a To check the contents of the program. press the CALL button The programmed tracks appear in the programmed order on
the display each time the CALL button IS pressed
- To change the program, press the CLEAR button while ,n the stop mode, then program the dewed track The last
programmed track 1s replaced wth the newly ,np"t track
. To clear the entire program, press Ihe PROG/DIRECT or & button wh,le ,n the stop mode
. The angle track repeat mode cannot be set dwng program playback
. Programs w,th total playtng i,mes of over 99 m,nules can be set, but the lime WI,, not be dtsplayed properly
. Programmed playback is not possible with non-',nallzed d,scs
6. Playing in random order (remote control unit only) .._....................................... Random Playback
.
"se th,s functlo" to play ail the tracks on the d,sc once in 'ando". older
*I
In rhe sop mode. press the RANDOM button
. The "RANDOM" indwror lights
Press the t,tl tplayipause, button
- Dwng nom13 playback
3
Tracks are automat,caiiy played ,n random order
- Dumg the all~track repeat mode
All the tracks are piayed once I" random order. then repeated 8" anoiher random order
- To cancel the random play mode. I" the stop mode. press the RANDOM button again
11