Radio Button/LED
Radio Button
Short press
Radio LED*
Blue flash - slow*
Blue flash - fast*
Blue flash to solid red
Off
* If the signal quality option is on (default is off) and the printer
is awake, the amount of time the blue radio LED is on indicates
the signal strength. For example, if the blue LED is on 90% of
the time, the printer has a very strong signal; however, if the
blue LED is on only 10% of the time, the printer has a very
weak signal. When the signal quality option is turned on, the
blue radio LED indicates signal strength only. When the printer
is asleep, the radio strength is not indicated.
Reset Button
Reset Button
Short press
CardReader Audio Indicators
Beep(s)
1 long
2 short
Toggles radio power off and on.
RF power is on and printer is asleep.
RF power is on and printer is awake.
The printer is out of range of the access point
and/or infrastructure and it is not correctly
configured for the radio it recognizes.
RF power is off.
Re-boots printer and cycles power.
Description
Bad read.
Good read.
U
SING THE CONTROL PANEL
Action
None.
None.
15