Reading The Led Status - Datamax APEX 4 User Manual

1.3 Reading the LED Status

Figure 4 points out the location of the LED indicators described in Table 1 and Table 2
Table 1 explains the LED indicator status.
Refer to Figure 1 for the locations described for ON/OFF and FEED push button switches and AC
adapter socket.
LED
LED # 1
Communication
LED # 2
Battery
LED # 3
Magnetic Card
Reader
&
Printer Error
FIGURE 4 - LED INDICATOR LOCATIONS
Table 2
Table 1 - Reading the LED Status
Status Condition
Flashing
GREEN
Steady
Flashing
BLUE
Steady
Flashing
AMBER
Steady
AMBER Steady
Steady
GREEN
Flashing
explains the Error/Warning indicator status.
Power is ON and the printer is in USB mode
Communicating with host
Power is ON and the printer is in Bluetooth mode
Transmitting/receiving
Power is ON and the printer is in 802.11b/g mode
Transmitting/Receiving
Battery being charged. The LED will turn off when the
battery is fully charged
•
Indicates that MCR is ready to accept data
•
Indicates that SCR is ready to accept data
Indicates that the printer is in USB Bootloader mode.
(USB cable is plugged in and Dip Switches 5 and 7 are
ON)
Note: If USB is unplugged, LED will flash Amber until
printer is reset manually
5
Function