Kenmore 15/I649 Instructions Manual page 27

REPLACEMENT OF THE BELT
Push motor against machine and remove belt
from motor pulley Let motor down gentty
Pull belt out over hand wheel Install new
belt reversing the above procedure
L _
Fig, A
CLEANING AND OILING
Keep the moving parts free from dust and
threads for quiet and efficient operation,
Cleaning should be done with a small brush
When machine runs hard or makes excessive
noise, place a drop of KENMORE sewing
machine oil at the points indicated in figs
A,B&C
Swing hinged face cover plate open to oit
points indicated at end of machine head
27
J