Volvo XC90 Owner's Manual page 234

09 Maintenance and servicing
Replacing bulbs
09
6. Move the retaining spring up and push it
slightly to the left until it seats properly.
7. Press the bulb holder into place on the
headlight housing.
8. Reinstall the plastic cap. The letters
"HAUT" on the cap must be upward.
Replacing the high beam bulb
(halogen headlights)
1. Remove the rubber cover by pulling it off.
2. Pull the connector from the lamp housing.
3. Loosen the bulb's retaining spring by first
moving it to the right and then moving it
out of the way.
232
4. Pull out the bulb from the holder.
5. Insert the new bulb (without touching the
glass) in the holder.
6. Move the retaining spring up and push it
slightly to the left until it seats properly.
7. Press the bulb holder into place on the
headlight housing.
8. Press the rubber cover into place.
Replacing parking light/side marker
light bulbs
1. Turn the lamp holder approximately 1/4
turn counterclockwise and pull it out of
the headlight housing.
2. Pull the bulb straight out.
3. Align the guide lugs on the side of the
base of the new bulb in the grooves in the
holder and press it into place.
4. Press the lamp holder into the place in
the headlight housing and turn it approxi-
mately 1/4 turn clockwise.
Replacing the turn signal bulb
1. Turn the lamp holder approximately 1/4
turn counterclockwise and pull it out of
the headlight housing.
2. Press in the bulb slightly and pull it out of
the holder.