2000-Sheet Dual Input (Ttm)-Tray 3 Front Cable Assembly Removal - Lexmark W840 Service Manual

2000-sheet dual input (TTM)—tray 3 front cable assembly removal
1.
Remove the left cover. See
2.
Remove the tray 3 assembly. See
page 4-56.
3.
Remove the tray 3 front cover. See
page 4-57.
4.
Remove the E-clip with a prying tool securing the tray lift pulley (A) to the tray lift shaft assembly (B).
5.
Remove the lift cable pulley (A).
Note: The tray 3 front cables (C) become detached.
6.
Remove the tray 3 front cables (C) from the tray lift shaft assembly (B).
"2000-sheet dual input (TTM)—left cover removal" on page
"2000-sheet dual input (TTM)—tray 3 assembly removal" on
"2000-sheet dual input (TTM)—tray 3 front cover removal" on
4024-XXX
4-50.
4-61
Repair information