Application Modes; Access Control Application - Union Community VIRDI 6000 Configuration Manual

TM
VIRDI 6000 Administrator Manual

4.4. Application Modes

4.4.1. Access Control Application

An Access Control application is normally used for providing access to a secure area, function
keys are not needed unless extra tracking of the user is needed. If the system is setup for Access
Control and Function keys are used for authentication the user is required to press the mode
function button before entering their ID, Card or Fingerprint. Anytime the mode is changed the top
status bar will show the current mode. (F1, F2, F3, F4 or Normal). Once the user is authenticated
as successful the door will open.
Normal Mode – Touch the
ID, password or fingerprint.
F1 Mode – Touch the
F2 Mode – Touch the
F3 Mode – Touch the
F4 Mode – Press the
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
or the
then authenticate with card, ID, password or fingerprint.
then authenticate with card, ID, password or fingerprint
then authenticate with card, ID, password or fingerprint
then authenticate with card, ID, password or fingerprint
button then authenticate with card,