Authentication Type - Union Community VIRDI 6000 Configuration Manual

TM
VIRDI 6000 Administrator Manual

3.2.1.4. Authentication Type

There are up to 11 different ways a user can be authenticated at the terminal, this provides
flexibility for users who do not have a card, or have an unreadable fingerprint, or where extra
verification is needed for authentication. This depends on the setup by the administrator.
The four basic authentication methods are:
Fingerprint
Card
ID
Password
Combinations of the four basic methods are available.
1) Fingerprint Only – the user can enter their fingerprint on the fingerprint sensor and the
terminal will authenticate the result.
2) Card Only – the user can swipe their card at the terminal and the terminal will authenticate the
result
3) ID & Password – the user enters their ID, the terminal will request the user to then enter their
password.
4) Card & Fingerprint – the user swipes their card at the terminal then the terminal will request
the user to enter their fingerprint.
5) Fingerprint & Password – the user enters their fingerprint on the fingerprint sensor and then
the terminal will request the user to enter their password.
6) Fingerprint OR Password – the user can either enter their fingerprint only, OR the user can
enter their ID followed by their password.
7) Fingerprint OR Card – the user can either enter their fingerprint only OR swipe their card only.
8) Card OR Password – the user can either swipe their card OR enter their ID followed by their
password.
9) Card & Password – after the user swipes their card the terminal will request the user to enter
their password.
10) ID & Fingerprint OR Card & Fingerprint – after the user enters their ID the terminal will
request the user to enter their fingerprint OR the user can swipe their card, then the terminal will
request their fingerprint.
11) ID & Password OR Card & Password – this is a combination of #3 or #9. The user can
enter their ID followed by their password OR swipe their card first then enter their password.
Note: For password authentication the user must always first enter their ID.
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng