Network Settings - Union Community VIRDI 6000 Configuration Manual

TM
VIRDI 6000 Administrator Manual

3.3. Network Settings

The networks settings area allows you to setup IP addresses, gateways, subnet mask, dhcp or static
settings. See section 1.1.6. Touchscreen
For static IP usage you must program the Terminal IP, Subnet Mask and Default Gateway. If DHCP is
selected, these values cannot be programmed and will be grayed out. The port number must match
the port number that is programmed in the Authentication Server.
1) Touch the field you wish to change
2) A number pad will appear, and the field will be highlighted of the data you
3) Touching the number will erase the current data. Just enter the number you
Touch to cancel and close the window at anytime, any data that was entered will not
be saved. To save the data touch 'Done'.
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
Usage.
wish to change.
wish to use. Touch OK when finished, or arrow key to re-enter the data.