Sound Settings; Voice Volume; Sound Volume - Union Community VIRDI 6000 Configuration Manual

TM
VIRDI 6000 Administrator Manual

3.5.3. Sound Settings

Touch the Sound icon. Then touch the area which you would like to change.

3.5.3.1. Voice Volume

The voice volume controls the volume of the voice prompts in the terminal. This volume is
separate from the sound volume. If you do not want any voice prompts put the slider all the way to
the left, off. For maximum volume put the slider all the way to the right. A simple sound file will
play when sliding the button from the left to the right to give you indication of the volume you have
selected.

3.5.3.2. Sound Volume

The sound volume controls the volume of the sounds in the terminal. These sounds are short tone
sounds (button presses, window popup, error, success tones, etc). This volume is separate from
the voice volume. If you do not want any system sounds put the slider all the way to the left, off.
For maximum sound volume put the slider all the way to the right. A simple sound file will play
when sliding the button from left to right to give you indication of the volume you have selected.
Note: A sound tone and a voice cannot play at the same time. For example when the voice
says 'You are authorized', you will not hear any sound tones.
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng