Time/Attendance Settings; Access Control Mode; Time & Attendance - Union Community VIRDI 6000 Configuration Manual

TM
VIRDI 6000 Administrator Manual

3.4. Time/Attendance Settings

In the Time & Attendance programming area you can setup the terminal in 1 of 3 Application
Modes. The terminal can only operate in one mode. The top status bar will show the current mode
of operation and the icon will be highlighted.

3.4.1. Access Control Mode

Time schedules are not programmable in this mode. An Access Control application is
normally used for providing access to a secure area, function keys are not needed unless
extra tracking of the user is needed. If the system is setup for Access Control and Function
keys are used for authentication the user is required to touch the mode function key before
entering their ID, Card or Fingerprint. See Section
Touch the
3.4.2. Time & Attendance
Time schedules should be programmed when using this mode. Time and Attendance
Application is for systems that require tracking of employee's work time. If the system is setup
for Time and Attendance, for authentication the user is required to touch the function key
before entering their ID, Card or Fingerprint. See Section
Application
Touch the
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
icon to change to this mode.
icon to change to this mode. A time schedule icon will appear.
4.4.1. Access Control Application
4.4.2. Time & Attendance