Skoda Rapid Owner's Manual page 96

Symbols in the display

Read and observe on page 90 first.
The following symbols are displayed in the MAXI DOT display:
Symbol
Charge status of the telephone battery

Signal strength

a phone is connected to the hands-free system.

The hands-free system is visible to other devices.

A multimedia unit is connected to the hands-free system.

a) This function is only supported by some mobile phones.
Connecting the mobile phone to the hands-free system

Read and observe on page 90 first.
To connect a mobile phone with the hands-free system, the two devices must
be paired. Detailed information on this is provided in the operating instructions
for your mobile phone.
The following steps must be carried out for pairing
›
®
Activate Bluetooth and the visibility of your mobile phone on your tele-
phone.
›
Switch on the ignition.
›
Select the Phone - New user menu in the MAXI DOT display and wait until
the hands-free system has completed the search.
›
Select the phone you wish to connect from the list of units found.
›
Confirm the PIN .
2)
›
If the hands-free system announces (as standard SKODA_BT) on the display
of the mobile phone, enter the PIN
connection is established .
3)
1) On vehicles fitted with the Amundsen+ navigation system, this function can be accessed via the naviga-
tion system menu; refer to the » operating instructions for the Amundsen+ navigation system.
®
2) Depending on the Bluetooth version on the mobile phone, an automatically generated 6-digit PIN (SSP)
is either displayed, or the PIN 1234 has to be entered manually.
3)
Some mobile phones have a menu, in which the authorisation for establishing a Bluetooth
is completed by inputting a PIN number. If the authorisation input is required, it must always be per-
formed when re-establishing the Bluetooth connection.
Meaning
a)
a)
.
1)
within 30 seconds and wait, until the
2)
›
To finish pairing in the MAXI DOT display, confirm the creation of the new
user profile.
If there is no free space available to create a new user profile, delete an exist-
ing user profile.
During the connecting procedure, no other mobile phone may be connected
with the hands-free system.
Up to four mobile phones can be paired with the hands-free system, whereby
only one mobile phone can communicate with the hands-free system.
The visibility of the hands-free system is automatically switched off 3 minutes
after the ignition is switched on and is also deactivated when the mobile
phone has connected to the hands-free system.
Restoring the visibility of the hands-free system
If you have not managed to connect your mobile phone with the hands-free
system within 3 minutes of switching on the ignition, the visibility of the
hands-free system can be re-established for 3 minutes in one of the following
ways.
›
By turning the ignition off and on.
›
By turning voice control off and on.
›
In the MAXI DOT display under menu item Bluetooth - Visibility.
Creating a connection with an already paired mobile phone
After switching on the ignition, the connection is automatically established for
the already paired mobile phone
ic connection has been established.
Disconnecting the connection
The connection to a connected mobile phone can be ended in the following
ways.
›
By withdrawing the ignition key.
›
By disconnecting the hands-free system in the mobile phone.
›
By disconnecting from the user in the MAXI DOT display under the menu item
Bluetooth - User.
®
connection
. Check on your mobile phone if the automat-
3)
Communication and multimedia

93