Cruise Control System - Skoda Rapid Owner's Manual

Hide thumbs Also See for Rapid:
Table of Contents

Advertisement

Function
Fig. 98 Location of the sensors / range of the sensors
Read and observe
and
Approximate range of sensors
Area
» Fig. 98
A
B
Acoustic signals and display
The interval between the acoustic signals becomes shorter as the clearance is
reduced. A continuous tone sounds from a distance of approx. 30 cm - danger
area. From this moment on do not continue reversing!
Description of the indications in the radio or navigation system display,
radio instruction manual, navigation system user guide.
Activation/deactivation
Read and observe
and
The system is activated automatically by engaging the reverse gear. This is
confirmed by a brief audible signal.
The system is deactivated by disengaging reverse gear.
Displaying an error
If a warning signal sounds for about 3 seconds after activating the system and
there is no obstacle close to your car, this indicates a system fault. Seek help
from a specialist garage.
on page 110 first.
Distance behind the vehicle (in cm)
160
60
on page 110 first.
Note
For vehicles with a factory-fitted towing device, the system cannot be activa-
ted when towing a trailer.

Cruise Control System

Introduction
This chapter contains information on the following subjects:
Functioning
Operating Description
The Cruise Control System (CCS) maintains a set speed without you having to
actuate the accelerator pedal.
The state where the GRA maintains the speed is referred to hereinafter as the
control.
WARNING
The GRA only serves to support and does not relieve the driver of the re-
sponsibility for the vehicle operation.
Always adjust the speed and driving style to the current visibility, weath-
er, road and traffic conditions.
Functioning
»
the
Read and observe
Basic requirements for start of control
The GRA is activated.
On vehicles with a manual transmission, the second gear or higher must
be engaged.
On vehicles with an automatic transmission, the selector lever must be in
the D, S position or in the Tiptronic position.
The current speed must be higher than 20 km/hr.
This is only possible within the range which is permitted by the power output
and braking power of the engine.
on page 111 first.
Assist systems
111
112
111

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents