Skoda Rapid Owner's Manual page 75

Front armrest
Setting the height
›
Lift the armrest fully upwards in the direction of the arrow
move it back down completely.
›
Move the armrest into one of the 5 locking positions.
The armrest includes a storage compartment
Rear armrest
Folding forward
›
Pull on the loop and fold the armrest forward in the direction of the ar-
A
row » Fig. 57.
A cup holder may be located in the armrest
72
Using the system
Fig. 56
Adjusting armrest
» Fig. 56 and then
» page 78.
Fig. 57
Fold the armrest forward
» page 74.
Seat backrests
Fig. 58 Fold seat backrest forwards / pull seat belt to the side panel and
ready position of the seat belt
The luggage compartment can be increased in size by folding the seat backr-
ests forward. The seat backrests can also be folded forward individually on ve-
hicles with divided rear seats.
Before folding the seat backrests forwards, adjust the position of the front
seats in such a way that they are not damaged by the folded seat backrests.
If the front seats are too far back, we recommend that you have the rear head
restraints removed before the seat backrests are folded forward
Fold down split seat backrest
›
Insert the belt buckle latching element
the side panel - ready position
›
Press the release lever in the direction of arrow
A
›
Remove the backrest in the direction of the arrow
Fold down undivided seat backrest
›
Insert the belt buckle latching elements
ings in the side panel - ready position
›
Push the release handles on both sides of the seat backrest in the direc-
A
tion of arrow simultaneously.
1
›
Remove the backrest in the direction of the arrow
Fold back split seat backrest
›
If you removed the head restraint, you need to reinsert it with the backrest
tilted slightly forwards.
›
Pull the rear outer seat belt to the side panel in the direction of arrow
» Fig. 58.
3
of the seat belt into the opening in
C
» Fig. 58.
.
1
.
2
of the outer belts into the open-
C
» Fig. 58.
.
2
» .
