KT&C KVR-H410AN User Manual page 13

Select an audio channel.
[10] AUTO SEQUENCE
To display each camera in sequence, display duration is selectable in DISPLAY menu.
[11] BACKUP
Call backup menu to start recorded data archiving to external media.
[12] Channel / Numeric button
Refer to the "Front direction button" page.
[13] LED
LED shows the status of operating.
• POWER : Highlight when power is on.
• RECORD : Highlight when DVR is recording.
• NETWORK : Highlight when DVR is connected by network.
• SCHEDULE : Highlight when DVR is recoding on scheduled mode.
• EMERGENCY : Highlight when DVR is recording on emergency mode.
[14] ERROR LIST
In case of system error, the error icon appears on screen with beep sound. Press
"ENTER" button to see
the list and to stop beep sound.
Icon will be shown in the status bar.
• Main Disk1 Error : 1
• Mirror Disk Error : "Mirror Disk" HDD error.
(Unless use Mirror disk, message "Main Disk2 Error" will be shown)
• DNS Connection Error : Dynamic IP service fail.
• SMTP Connection Error : "E-mail notification" fail.
• Disk Full : Hard disk drive is full.
[15] SPLIT GROUP SETTING
In the split group, press "▶" button to change a channel on each group.
[16] CHANGING SPLIT MODE
Press to change for various split mode.
[17] ID
To control several DVRs using one remote controller, assign the ID to DVR and remote
controller.
st
HDD error.
13