Toshiba D-VR6KC Owner's Manual page 81

Dubbing using other equipment
You can connect a DV format digital video camera to the DV IN terminal to record from it.
NOTES:
• You cannot record from a DV IN
terminal onto video tape. If you want
to record onto video tape, please
record onto the disc first, then copy
to the video tape.
• The DV terminal of this recorder
supports only input from a DV format
digital video camera. It cannot output
to a connected device. Some models
of DV format digital video cameras
may be not compatible.
• DV recording does not start in the
following cases:
- While recording or in the Chase
playback mode
- While timer recording standby mode
- While VCR mode
• DV recording does not work if the DV
terminal is connected to equipment
other than DV format digital video
camera,such as a PC.
• Do not keep the DV terminal
connected unless you record from a
DV format digital video camera, as it
may give influence on the recorder if
operated.
• When you want to record both stereo
1 and stereo 2 sounds from a DV
format digital video camera,
additionally make a connection to the
audio input jacks on this recorder
using cables such as audio/video
cables supplied with the DV format
digital video camera.
• If a DV format digital video camera is
not recognized, pull out the plug and
connect it again.
• Some models of DV format digital
video cameras may support a
different compression format. From
such equipment, recording is not
possible.
• Depending on the models of DV
format digital video cameras,
recording may not work properly or
some functions may be disabled.
• On an input source from a DV tape
which is partly recorded over,
chapters may not made properly.
2J41101B_E P72-81
Playback Digital Video Camera
Recording VCR
Preparation:
• Turn ON the TV and set to the video input mode.
• Set the digital video camera to the Playback mode.
• Connect a DV format digital video camera to the DV IN terminal on
the front panel.
• Load a disc with enough recording space
1
Press DVD to set this unit to DVD mode.
The DVD indicator will light.
2
Press INPUT SELECT and set the channel to DV.
DV control menu appears on screen.
• To clear the DV control menu, press DISPLAY repeatedly.
• It is impossible to switch to the VCR mode when you set the
channel to DV.
3
Press
The digital video camera starts playback.
To stop the playback at a desired scene, press
" " then press ENTER
3
4
Press DUBBING.
The digital video camera starts playback and this unit starts
recording.
5
To stop dubbing, press STOP.
If the playback finished, the recording stops automatically.
81
To DV OUT
To DV IN
DV cord (not supplied)
1 : PLAY
3 : STOP
4 : PAUSE
9 : F.FWD
8 : REW
or to select " ", then press ENTER.
5/28/07, 12:06 PM
.
or to select
81