Protect Disc; Undo Finalize; Other (System Setup); Dvd-Ram Physical Format - Toshiba D-VR6KC Owner's Manual

Setting the disc / Other
NOTES:
• During finalizing, the cursor will move repeatedly.
When the finalization is finished, "FINALISING COM-
PLETED PRESS ENTER" will appear. Press ENTER
to clear the screen.
• The finalization process may require a few minutes
to about 1 hour according to disc type or the amount
of free space on the disc.
• You can record or edit a finalized DVD-RW (in VR
mode) by cancelling the finalizing, but you cannot do
these operations with a DVD-RW (Video mode), or
with a DVD-R.
• You cannot playback a disc recorded on VR mode on
a unit that does not support DVD-RW.
• Even if you finalize a disc in the Video mode, the disc
cannot be played back in some DVD players.
• A DVD-R disc cannot be named after it is finalized.

PROTECT DISC

You can protect a disc to prevent the content recorded
on it from being erased, edited or re-recorded.
Only DVD-RAM and DVD-RW (in VR mode) can be
protected.
Select "PROTECT DISC" and select "ON" to protect the
disc.
To cancel the disc protection, select "OFF".

UNDO FINALIZE

You can cancel the finalization of a finalized DVD-RW
(in VR mode).
You cannot cancel the finalization for discs other than
above. You can record or edit on a disc whose finaliza-
tion has been canceled.
Select "UNDO FINALIZE", and the screen below will
appear.
UNDO FINALIZE
START
• When you select "START" and press ENTER,
unfinalizing will start. The screen below will appear.
UNFINALIZING
PLEASE WAIT
• When you select "CANCEL" and press ENTER, the
DISC SETUP screen will appear.
2J41101B_E P23-33
(SYSTEM SETUP)
CANCEL
29
NOTES:
• During unfinalizing, the cursor will move repeatedly.
When unfinalizing is completed, "UNDO FINALISING
COMPLETED PRESS ENTER" will appear. Press EN-
TER to clear the screen.
• The unfinalizing process may require a few minutes
to about 1 hour according to disc type or the amount
of free space on the disc.
• When the disc's finalization cannot be canceled, you
cannot select "UNDO FINALIZE".

DVD-RAM Physical Format

Physically formats a DVD-RAM disc. Whenever you use
a new disc for the first time, be sure to format it.
NOTE:
The physical format process may require about 1 hour
according to disc condition.
This section describes the other setting in SYSTEM
SETUP
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "OTHER" from "SYSTEM SETUP". For the pro-
cedure, see steps 1 to 3 in "Using the SETUP MENU"
on page 24.
SETUP MENU
TIMER REC SET LANGUAGE
SYSTEM SETUP PARENTAL
DIMMER
AV SETUP CLOCK
DISPLAY/CALL
REC SETUP DISC SETUP
CH SETUP OTHER
OTHER
DIMMER (Brightness of the display
window)
You may adjust the brightness or turn off the display on
the front panel of the unit. Select "DIMMER" and select
the display window status from the below.
AUTOMATIC: When the power is on, the display win-
dow appears bright. When the power
is off, it appears dark.
DIM: The window display always appears
dark.
OFF: When the power is on, the display win-
dow appears dark. When the power is
off, it is turned off.
DISPLAY/CALL (Turning the screen dis-
play "ON" or "OFF")
You can turn off the screen display that is output to the
TV screen by this unit. Select "DISPLAY/CALL", and
select "ON" or "OFF".
ON: The screen display appears.
OFF: Nothing but the SETUP MENU and error mes-
sages appear.
5/28/07, 12:04 PM
OTHER
AUTOMATIC
ON
29