Using The Keyboard Screen - Toshiba D-VR6KC Owner's Manual

Editing the disc
Changing a disc name

Using the keyboard screen

This section explains the function of the keyboard screen
and how to input characters. The disc name and the
title name can be changed using the keyboard screen.
Keyboard screen types
The keyboard screen has three types of "Letters",
"Numbers" and "Signs". The type can be switched over
by pressing REW or F.FWD.
Letters: This is mainly used for inputting alphabetical
letters.
For the keyboard screen of Letters, see
page 75.
Numbers: This is used for inputting numbers.
Live Show
RETURN
Letters
Exit
Numbers
< >
Signs
DISPLAY
OK
Signs: This is used for inputting symbols.
Live Show
RETURN
Letters
Exit
Numbers
< >
Signs
DISPLAY
OK
;
Inputting characters
There are two methods for inputting characters.
Character input 1
1
Press , , or
be input.
2
Press ENTER.
The selected character will be input.
76
2J41101B_E P72-81
CANCEL
1 2 3
Back
DISPLAY
4 5 6
OK
7 8 9
0
1 2 3 CANCEL
) ! , ? @ # & % / Back
4 5 6 DISPLAY
. * _ - + = [ ] : OK
7 8 9
¨ \ ' < > $ :·) :·( ;-/ :·}
0
Space bar
to select the character to
76
Character input 2
Example: Here explains the procedure when you input
"F" and "J".
1
Press the numeric keys continuously and select
the character to be input.
To input F, press 3 three times.
NOTE:
When the interval between the pressing of the numeric
keys is 2 seconds or more in selecting the input
character, the selected character will automatically be
input.
2
When the character to be input is selected, stop
the key operation.
The selected character will automatically be input.
F
3
Press the numeric keys where the following
character is assigned.
4
When the character to be input is selected, stop
the key operation.
The selected character is automatically input.
Fj
5/28/07, 12:06 PM
3
d
e f
5
j
k l