CONVEYOR REMOVAL
1. Remove door from front of oven by unfastening the latching mechanisms on the left side of the door (facing
oven).
2. Pull conveyor out from oven baking chamber.
3. Re-install in reverse order.
FINGER REMOVAL
!
CAUTION:
1. Open Door.
NOTE: Door may be removed by lifting from hinges.
2. Grasp top finger housing, lift up from
bracket and pull forward.
Columnating
Plate
Finger
Housing
BOTTOM FINGER ASSMBLY
4. Slide finger cover from housing. Lift out
inner Columnating Plate.
18
Oven must be cool.
Finger
Cover
3. Grasp bottom finger housing handle and
pull forward, sliding assembly out of oven.
Columnating
Plate
Finger
Housing
TOP FINGER ASSMBLY
5. Reassemble in reverse order. Be sure
finger assembly seats securely over rear
openings.
Impinger II – Installation & Operation Manual
Finger
Cover