Sensors Tab; Low Battery Report Options - Linear PERS-4200 Series Installation & Operation Instructions

11.3 Sensors Tab

The Sensors tab displays fi ll-in fi elds for setting information regarding the
wireless sensors programmed into the Console. Sensor status indicators
also display the current condition of the sensor.
Up to 16 wireless sensors can be used with each PERS-4200 Console.
The transmitter's ID number is printed on a removable tag attached to
the unit's lanyard.
TRANSMITTER'S
ID NUMBER IS
PRINTED ON TAG
Transmitter ID Tag

Low Battery Report Options

Supervised wireless sensors send low battery signals when they detect
that their battery is low. When a low battery signal is received from a
wireless sensor, two options are available to control when the Console
reports a low sensor battery.
• Option 1 - When a low battery signal is received from a sensor, the Console
will immediately report a low battery.
• Option 2 - When a low battery signal is received from a sensor, the Console
will wait for another low battery signal from the same sensor within a 24 hour
period before reporting a low battery.
✓ NOTE: In Night Mode, the low battery annunciations are suppressed, but
Console reporting is not.
Select Option 1 or Option 2 for the Console. This setting will affect all
wireless sensors used with the Console.
RA4200 Sensors Tab
SENSOR STATUS
17