Pyle PPDM1 Instruction Manual page 7

Bell symbol
.t.
displayed = hourly alarm on
Bell symbol not displayed = hourly alann off
Now press the D button, aU settings are saved and the set
alarm is activated automatically.
22:D5
Li:2 •
Activate/Deactivate Alarm
Press the A button when the alarm time is d isplayed
Alarm symbol -I} is displayed = alarm on
Alarm symbol not displayed = alarm off
Switch
off
Alarm
lJVhen the alarm rings, you can sw itch it off by pressing the A,
C or D button.
Countdown Timer
Press the C button in lime mode until
T IMER is d isplayed.
The heart rale monitor watch
possesses a countdown timer a nd a
count up timer.
Basic setting 00:01 :00 (1 minute)
...
"""
TIMER
Keep the
A
button pressed to set the countdown timer,
"SETTING" appears.
Set the minules w ith the C bulton, confirm with the A button,
select the hours w ith the C button, confirm with the A button.
:[d
r
D:D I
DO
CIlIOO
:[d U
D:D
I
DO
CIlIOO
:[d 5
D:D I
DO
CIlIOO
r:
The timer starts to count down the previously set time again
after zero is reached.
U:
The timer starts to count up from zero after zero is
reached.
S: The timer stops after zero is reached.
Confirm the entry w ith the D button.
For all three types of timers applies:
• Press A button - Timer starts
• Press A button again - Timer stops
• Press A button again - Timer continuous
• Keep A pressed to( about 3 seconds when the
time is stopped - timer resets to the originally set time.
' lM"len the countdown timer reaches zero, an a lann sounds,
which ends after about 15 seconds, or can
be
ended by
pressing the A , C
Of
D button.