Table of Contents
Advertisement
1
Bluetooth module
Replacing the Bluetooth Module
CAUTION:
Before you perform any of the procedures in this section, follow the safety instructions in the
Information Guide
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1 Follow the instructions in "Preparing to Work Inside the Computer" on page 7.
2 Follow the instructions in "Removing the Bluetooth Module" on page 17, as applicable.
3 Connect the new Bluetooth module to the connector cable.
4 Place the Bluetooth module in its compartment.
5 Replace the M2 x 3-mm screw to secure the Bluetooth module to the base of the computer.
6 Replace the modem/Mini PCI/wireless cover and tighten the screws.
20
Internal Card With Bluetooth® Wireless Technology
3
2
Bluetooth module connector
.
1
2
3
Bluetooth connector cable
Product
Advertisement
Table of Contents
