Connecting The Cables - Epson TM-T82 User Manual

Connecting the Cables

CAUTION:
For using a serial interface, use a null modem cable.
For using a parallel interface, use an IEEE 1284 cable.
For using a USB interface, do not turn on the printer before installing the printer driver.
For using an Ethernet (10Base-T/100Base-TX) interface, do not connect a telephone line or a
drawer kick-out cable to the Ethernet connector.
When LAN cables are installed outdoors, make sure devices without proper
surge protection are cushioned by being connected through devices that do
have surge protection. Otherwise, the devices can be damaged by lightning.
1. Make sure the printer is turned off.
2. Connect the interface cable to the printer.
For the shape of each connector, see the illustration below. (Mounted interfaces vary
by the printer model.)
RS-232
10BASE-T/
100BASE-TX
Note:
When connecting the USB cable, fix the USB cable with the hook shown in the illustration
below to prevent the cable from coming off.
3. Connect the other end of the interface cable to the computer.
4. Connect the AC cable to the AC adapter.
IEEE1284
USB
DC24V
English
DK
(Drawer kick-
out connector)
Hook
TM-T82 User's Manual 7