Reset; Download Setup; Downloading The Software; Information - Sharp LC-46LX650H Operation Manual

Appendix

Reset

If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press MENU and the MENU screen displays.
1
Press b/ c / d to select "View setting".
2
Press a / b to select "Reset", and then press
3
ENTER.
If you have already set the password, enter it
4
here.
• "Return to factory pre-settings" displays on the
screen.
Press c / d to select "Yes", and then press
5
ENTER.
• "Now, TV will restart automatically. OK?" displays
on the screen.
Press c / d to select "Yes", and then press
6
ENTER.
• "Now initialising..." displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
Press a / b to select the desired language
7
listed on the screen, and then press ENTER.
Press c / d to select "HOME" or "STORE",
and then press ENTER.
Press c / d to select "Digital Search" or
8
"Analogue Search", and then press ENTER.
The TV searches for, sorts and stores all
9
the receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press
RETURN.
NOTE
• When the TV is in "STORE" mode, repeat steps 1 to 7 to change to
"HOME" mode.
• "Reset" is greyed out in 3D mode. To select the "Reset" menu, you
need to switch to 2D mode.

Download setup

The TV automatically determines whether a new software
version is available when the TV is in standby mode.
Go to "Menu" s "Setup" s "View setting" s "Individual
setting" s "Standby search" s "Download setup".
After factory presetting,
TV will restart automatically
Now initialising...
Selected item
Automatically searches for new software
Yes
updates available when the TV is in
standby mode.
No Does not search for update information.
Checks if there is new software
Now
immediately.

Downloading the software

You can select the method of update.
If the software is updated, the confirmation
1
message "New download information has
been detected." appears.
• If the TV receives the update service while in
standby mode, a confirmation message displays
after turning on the power.
Follow the screen prompts.
2
Selected item
Starts downloading immediately.
Typically, it takes approximately 30
minutes for download. You cannot carry
out other operations while downloading.
Yes
• Cancels the download by pressing
ENTER on the remote control unit when
"Discontinue" is displayed on the screen
during the update.
Starts downloading automatically several
No
minutes after entering standby mode.
NOTE
• Updating the software may take several hours in the worst case.
• The TV must remain in standby mode for download. Do not turn off
the power.

Information

Picture / Audio test

When external equipment is connected with the TV
powered on and there is no audio/video output, the
TV may determine which equipment could cause a
problem between the TV and the external equipment.
Go to "Menu" > "Setup" > "Information"
> " Picture / Audio test".
Selected item
Perform a test for picture display. When
external equipment is connected but the
Picture test
picture is not displayed, the test will be
performed.
Perform a test for audio playback. When
external equipment is connected but the
Audio test
audio does not playback, the test will be
performed.
NOTE
• Terminals which can be tested:
HDMI, component, composite, D-sub
• External speakers cannot be tested. This function is available for the
TV speakers only.
Description
Description
Description
97