Manual Picture Settings; Picture Adjustment; Advanced Picture Settings - Sharp LC-46LX650H Operation Manual

Watching TV

Manual picture settings

Picture adjustment

You can adjust the picture to your preference.
Follow the steps to adjust the picture.
Press MENU and the MENU screen displays.
1
Press b / c / d to select "Picture".
2
CH list
:Enter
: Select
ENTER
Press a / b to select the desired menu item.
3
Press ENTER to proceed if necessary.
Press a / b or c / d to select the desired item
4
or adjust the item to the desired level. Press
ENTER if necessary.
NOTE
• For resetting all adjustment items to factory preset values,
press a / b to select "Reset", press ENTER, press a / b to
select "Yes", and then press ENTER.
• When "Backlight" is adjusted, "OPC" is set to "Off".
Selected item
c button
Clear Picture Reduce signal noise to improve picture
Processing quality.
OPC
Sets whether or not the screen brightness
is automatically adjusted according to
the lighting condition in the room. (OPC
setting: See this page.)
Backlight The screen dims
Contrast For less contrast
Brightness For less brightness
Colour
For less colour
intensity
Tint Skin tones become
purplish
Sharpness For less sharpness
Advanced For finer picture adjustments. (See pages 41
to 43.)
Reset
Resets all picture adjustment items to the
factory preset values.
Menu
Setup
:Back
Picture
[STANDARD]
AV mode
[STANDARD]
Clear Picture Processing
[Middle]
OPC
[Off]
Backlight
d button
The screen brightens
For more contrast
For more brightness
For more colour
intensity
Skin tones become
greenish
For more sharpness
w Clear Picture Processing
Reduce signal noise to improve picture quality.
Selected item
Improves picture quality through Clear
High
Picture Processing at a level above
"Middle".
Middle
Clear Picture Processing off.
Off
w OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
Using "OPC" on the menu screen
Selected item
The brightness is fixed at the value set in
Off
"Backlight" (See this page).
Automatically adjusts
On
Displays the OPC effect on the screen
On: Display
while adjusting the brightness of the
screen.
OPC sensor
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.

Advanced picture settings

The advanced settings enable you to set the picture
adjustment in more detail.
1
Press MENU and the MENU screen displays.
Press b / c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select the desired menu, and
4
then press ENTER.
Description
Description
41