Battery Assembly - Sharp LC-46LX650H Operation Manual

Enjoying 3D image

Battery assembly

The battery has an expected service life of
approximately 120 hours.
• When replacing the button battery, use only the designated
battery (CR2025 lithium button battery).
1 Use the tip of a ballpoint pen or similar object to
press in on the lock.
2 While pressing in on the lock, place your fingertip
in the groove and pull out the battery holder.
• Pull the battery holder all the way out.
3 Replace the battery.
Remove the battery according to the arrow
direction. Insert a new battery.
• Insert the battery with the negative side facing up.
1
56
2
4 Align the battery holder with the battery slot on the
3D Glasses and slide it back into place.
• Press it in until it locks.