When there is a failure in NTC sensors, during normal mode the three LEDs (b), (c) and (d) blink.
The appliance is controlled in the following way:
failure
sensor
Evaporator NTC
sensor
(no adaptivity)
Air NTC sensor
(adaptivity)
Evaporator NTC
sensor + Air NTC
sensor
(no adaptivity)
EUROFLEC
6.5. NTC sensors failure
failure
First start
During working
latest time before
First start
controlled by evap.
During working
controlled by evap.
First start
During working
latest time before
working time
6 hours
failure
NTC
latest times before
NTC
6 hours
latest times before
failure
compressor
cycles
controlled by
Air NTC
controlled by
Air NTC
10 min pause
controlled by evap.
15 min run
failure
10 min pause
15 min run
failure
defrost time
22 minutes
22 minutes
NTC
22 minutes
22 minutes
22 minutes
24/36