Adjusting The Oven Temperature; Self-Cleaning - Kenmore ELITE 790. 9802 Use & Care Manual

Kenmore range user manual
Hide thumbs Also See for ELITE 790. 9802:
Table of Contents

Advertisement

Self Cleaning
iNSTRUCTiONS
PRESS
When the Self-Clean
Cycle is Completed
1.
"HOT" will appear in the display. The time of day, the "DOOR LOCKED", I_ and "CLEAN" icon will
remain in the display.
2.
Once the oven has cooled down for approximately
1 HOUR, and the "DOOR LOCKED"
icon is no longer
displayed, the oven door can then be opened.
Stopping
or interrupting
a Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:
1.
Press @.
2.
The oven door can only be opened after the oven has cooled down for approximately
1 HOUR and the "DOOR
LOCKED" icon is no longer displayed.
Note: If your clock is set for normal 12 hour display mode the Delayed Self-Clean cycle can never be set to start more
than 12 hours in advance. To set for Delayed Self-Clean Cycle 12-24 hours in advance set the control for the 24 hour
time of day display mode.
Adjusting Oven Temperature
The temperature
in the oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe times and temperatures.
If you think the oven
temperature
is cooking too hot or too cool for the temperature you select, you can
adjust the actual oven temperature
to be more or less than what is displayed. Before
adjusting, test a recipe by using a temperature
setting that is higher or lower than the
recommended
temperature. The baking results should help you to decide how much
of an adjustment is needed.
iNSTRUCTiONS
PR ESS
To adjust
the oven temperature
1.
Press iLow';;_
2.
Press and hold _
for 6 seconds. The preset adjustment
number will appear and "UPPER" will flash in the display
(Fig. 1).
3.
To increase the temperature
use the number pads to enter the
desired change. (Example 30°F) (_
@
(Fig. 2). The
(_)
@
temperature
may be increased as much as 35°F (19°C). To
decrease the temperature
use the number pads to enter the
desired change. (Example -30°F)(_
@
and then press
(_
@
@
(Fig. 3). The temperature
may be decreased as much as
35°F (19°C).
4.
Press _ART_ to accept the temperature change and the display
will return to the time of day. Press _
to reject the change if
necessary,
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle or Broil temperature.
DISPLAY
Fig. 1
Fig. 2
Fig. 3
NOTE: Each oven may be adjusted individually.
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents