NuTone 846 Installation Instructions

Wall Cap
MODEL: 846
TERMINATES
8" ROUND DUCT
FOR WOOD WALL
INSTALLATION
Refer to Figure 1.
Attach Wall Cap to outside wall with
screws through four slots on side
of flanges.
FOR BRICK WALL
INSTALLATION
Refer to Figure 2.
Wall Cap can be set back into wall 2"
from outside face of brick and grouted
into place or can be placed flush with
surface of brick and anchored into
place with four lead anchors.

ATTACH DUCT WORK

Refer to Figure 3.
Insert 8" round duct into lip on rear
wall cap.
NOTE: Remove tape and be certain
louvers operate freely.
READ AND SAVE THESE
INSTALLATION INSTRUCTIONS!
3
13 ⁄ "
4
FIGURE 1
FIGURE 2
8" DIA.
DUCT
13
INSERT
DUCT INTO
1
5 ⁄ "
4
LIP ON
WALL CAP
FIGURE 3
Wall Cap
MODEL: 846
TERMINATES
8" ROUND DUCT
FOR WOOD WALL
INSTALLATION
Refer to Figure 1.
Attach Wall Cap to outside wall with
screws through four slots on side
of flanges.
FOR BRICK WALL
INSTALLATION
Refer to Figure 2.
Wall Cap can be set back into wall 2"
from outside face of brick and grouted
into place or can be placed flush with
surface of brick and anchored into
place with four lead anchors.
ATTACH DUCT WORK
Refer to Figure 3.
Insert 8" round duct into lip on rear
3 wall cap.
⁄ "
4
NOTE: Remove tape and be certain
louvers operate freely.
READ AND SAVE THESE
INSTALLATION INSTRUCTIONS!
3
13 ⁄ "
4
FIGURE 1
FIGURE 2
8" DIA.
DUCT
13
INSERT
DUCT INTO
1
5 ⁄ "
4
LIP ON
WALL CAP
FIGURE 3
3
⁄ "
4