Advanced Operation - Panasonic CY-BT100U Operating Instructions Manual

Advanced Operation

❑ Calling back
A call-back call can be made.
However, the callback function is disabled after disconnecting
Bluetooth communication. (e.g. communication disconnection
between the Bluetooth unit and mobile phone, and communica-
tion disconnection by turning off the power of the Head unit)
Step 1
Press the [Hang-on] after a call comes in.
Step 2
Confirm the telephone number on the Head unit.
Step 3
Press the [Hang-on] to make a call.
(Press [Hang-up] to activate cancellation.)
Note: Some mobile phones cannot display the telephone num-
ber of an incoming call or call back.
❑ Rejection of incoming calls
Press the [Hang-up] to reject an incoming call.
❑ Disconnection of Bluetooth
You can disconnect Bluetooth temporarily.
Disconnection
Press and hold the [Hang-up]. for more than 2 seconds
until the indicator putting out (approximately 2 seconds ) to
reject call on this unit.
Reconnection
Press [Hang-on]. The LED turns from blinking to perma-
nent.
Note: You cannot disconnect Bluetooth in the talking state but
end a call.
21