Rear Panel Facilities; Recording Outputs - Ada MP-2 Owner's Manual

Midi tube guitar pre-amp
Hide thumbs Also See for MP-2:
Table of Contents

Advertisement

[14] Edit functions
Rear Panel (R to L)
[1] Input
[2] Effects Loop A
Send
Level Switch
Return (Insert)
[3] Effects Loop B
Send
Level Switch
Return (Insert)
[4] Stage Outputs

Recording Outputs

[5]
Speaker Cabinet Emul. switch
[6] Unbalanced Outputs
[7] XLR Level switch (
[8] Balanced Outputs
[9] Pin 1 (Ground) Lift switch Used to eliminate hum from grounding problems when
When in Program Edit mode, the Bank Select, Number, and
Preset/User buttons select the parameter sections indicated in
the gray field above them.
Accepts unbalanced 1/4" phone instrument
inputs. Maximum level: +12.2 dBV (3.4 volts RMS). Plugging
into the front panel input overrides this input.
Carries channel A of signal following Stereo Chorus. Must be
switched on in software to be active.
This switch sets both the level from the Send and expected at
the Return for Effects Loop A.
Carries return from external effects units.Must be switched on in
software to be active. Mix is adjustable in software.
Carries channel B of signal following Stereo Chorus. Must be
switched on in software to be active.
This switch sets both the level from the Send and expected at
the Return for Effects Loop B.
Carries return from external effects units. Must be switched on
in software to be active. Mix is adjustable in software.
Stereo unbalanced 1/4" phone outputs which do not pass
through Cabinet Emulator circuitry. Intended for use as main
outputs for connection to a sound system. Maximum output
level:+17.1dBV
Selects emulation for the Recording Outputs only of either a 2-
12" cabinet or a 4-12" cabinet.
Stereo unbalanced 1/4" phone outputs which pass through
Cabinet Emulator circuitry. Maximum output level: +17.1 dBV
) This switch sets the output level from the balanced (XLR)
Line/Mic
outputs.
Stereo balanced XLR outputs which pass through Cabinet
Emulator circuitry. The signal from these outputs is identical to
the Unbalanced Outputs. Maximum output level is determined
by position of XLR Level switch: +12 dBV (Line), -16 dBV (Mic).
connecting to mixing consoles, etc. In the GND (normal)
Page: 11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents