Grounding Instructions And Serial Plate Location; Important Safety Instructions - Kenmore 790.75602 Use And Care Manual

Kenmore range user manual
Table of Contents

Advertisement

Important Safety Instructions
Grounding type
wall receptacle
fDo
not, under any
circumstance,
cut,
|
remove, or bypass
|
the grounding
prong.)
Power supply cord
with 3-prong
grounding plug
See the INSTALLATION
INSTRUCTIONS
packaged with this
range for complete
installation and grounding
instructions.
GROUNDING
INSTRUCTIONS
(electric ignition models only)
_'lVJV-'t;t_II_[_I
Avoid fire hazard or electrical shock. Do not use an
adapter plug, an extension
cord, or remove grounding
prong from
electrical
power cord. Failure
to follow this warning
can cause
serious injury, fire or death.
_'lVJV'-t:t_ll_,[_'llThisapplianceisequippedwitha3-pronggrounding
plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove
the grounding
prong from this plug.
For personal safety,
the range must be properly grounded.
For
maximum safety, the power cord must be plugged into an electrical
outlet that is correctly polarized and properly grounded.
If a 2-prong
wall receptacle
is the only available
outlet, it is the
personal responsibility
of the consumer to have it replaced with a
properly grounded 3-prong wall receptacle
installed by a qualified
_
electrician.
IMPORTANT
SAFETY
NOTICE
'_"
cf;
The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of substances
known
_
to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure
to such substances.
SERIAL
PLATE
LOCATION
You will find the model and serial number
printed on an serial plate. The serial plate is
located on the right side of the oven front
frame
in the storage
or warmer
drawer
compartment.
Please see the illustration for exact location.
Remeber
to record the serial number
for
future reference (See page 2, under Product
Record).
Serial plate location:
Open the storage or warmer drawer,
located on right side of range frame.
5

Advertisement

Table of Contents
loading

Table of Contents