Troubleshooting; Warranty Information - NutriMill Harvest Owner's Manual

TROUBLESHOOTING

Motor will not start.
Motor stalls during operation.
This may be caused from
overheating or improper use.
The Harvest mill has a built-in
thermal cut-off switch that
stops the motor to prevent
serious damage.
Unusual smell or noise
If problem persists, troubleshoot the source:
• Is grain too moist?
• Are millstones or mill chamber clogged?
• Is a foreign object caught between the millstones?
• Was the mill turned on when hopper was filled and millstones were at finest
grind setting?

WARRANTY INFORMATION

L'Chef, LLC warrants the NutriMill
in materials and workmanship for a period of 5 years. Defective product will be re-
paired or replaced with a comparable model at our sole discretion upon receiving the
defective product. L'Chef will not refund purchase price or provide any other remedy.
This warranty applies to the original noncommercial purchaser.
Warranty does not cover damage resulting from accident, misuse, shipping, normal
wear, commercial use, neglect, incidental or consequential damages, or from damage
caused by any foreign objects getting into the mill.
YOU MUST keep a dated sales receipt for warranty service.
To ensure full warranty, return the mill, securely packed, to:
L'CHEF
Attn: Service Dept.
825 N. Industrial Road
St. George, UT 84770
Include a copy of dated sales receipt, name, address information, phone number,
email address and a statement giving specific reason for return.
For your convenience, there is a Request for Warranty Service Form located at
www.boschkitchencenters.com. Click on the warranty button. For more information
call customer service at 1.877.267.2434 or email service@lchef.com.
Rotate adjusting knob to coarse setting (counter-
clockwise) until motor starts. Then adjust texture
knob to desired setting.
Unplug and allow mill to cool down. Remove
hopper, empty any left over grains or legumes,
and remove upper millstone. Make sure stones
and milling chamber are clean and dry. Try re-
starting motor with upper stone and hopper off. If
the motor starts, turn off the mill. Reassemble and
begin milling.
Milling heads rubbing during operation. Rotate the
adjustment knob to a coarser setting.
Harvest ™ mill to be free of manufacturing defects
®
4