Download Print this page

Kenmore 790.3106 Use And Care Manual page 6

Gas slide-in range
Hide thumbs Also See for 790.3106:

Advertisement

Product Record
In this space below, record the date of purchase,
model and
serial number of your product. You will find the model and
serial number
printed
on the serial plate.
Model
No.
790.
Serial No.
Date of purchase
Save these instructions
and your sales receipt
for future
reference.
Serial Plate Location
You will find the model and serial number printed
on the
serial plate.
The serial plate is located
along the interior side
trim and visible when the oven door is opened.
Remember
to record the serial number for future reference.
Serlal Plate Location
Conversion to Liquefied
Petroleum Gas (or L.P.Gas)
This natural
gas range is designed
to allow for conversion
to
Liquefied
Petroleum
(L.P.) Gas.
Only a qualified
service agent should perform
the L. P.
conversion.
Contact
the local gas provider
for conversion.
The L. P.Conversion
Kit is supplied
with this range and is
located
on the main back of the range. The kit contains
installation instructions which
must be read before and
followed
carefully
when installing the kit.
To avoid serious injury, any additions,
changes
or conversions
required
in order for this appliance
to satisfactorily
meet the application
needs must be made
by a qualified
service agent.
Grounding instructions
For personal
safety, the cooktop
must be properly
grounded.
For maximum
safety, the power cord must be plugged
into
an electrical
outlet that is correctly
polarized
and properly
grounded.
DO NOT Operate
the cooktop
using a 2-prong
adapter
or an extension
cord. If a 2-prong
wall receptacle
is the
only available
outleh it is the personal
responsibility
of the
consumer
to have it replaced
with a properly
grounded
3-prong
wall receptacle
installed by a qualified
electrician.
See the installatlon
instructions packaged
with this cooktop
for complete
installation and grounding
instructions.
This appliance
is equipped
with a 3-prong
grounding
plug for your protection
against shock hazard
and should be plugged
directly
into a properly
grounded
receptacle.
DO NOT cut or remove the grounding
prong
from this plug.
Grounding
Do not, under
any
type
wall
circumstances,
cut,
rece
remove,
or bypass
the grounding
prong.
Power supply
cord with
3-prong
grounding
plug
Avoid fire hazard
or electrica!
shock. DO
NOT use an adapter
plug, an extension
cord, or remove
grounding
prong from electrical
power cord. Failure to
follow
this warning
can cause serious injury, fire or death.

Advertisement

loading

This manual is also suitable for:

790.3107Elite 790.3106 seriesElite 790.3107 series