Sony KDF-E42A10 Service Manual page 142

Using the Settings
z If 4:3 Default is set to
anything but Off, the
Wide Mode setting
changes only for the
current channel. When
you change channels
(or inputs), Wide Mode
is automatically
replaced with the 4:3
Default setting. To retain
the current Wide Mode
setting as channels and
inputs are changed, set
4:3 Default to Off.
70
Option Description
4:3 Default Wide Zoom
Select the default
screen mode to
use for 4:3
Normal
sources.
Full
Zoom
Off
Display Area Select Normal to return to the default display area. Select -1 or
-2 to keep the edge of the picture out of screen.
Vertical Center Allows you to move the position of the picture up and down in
the window. (Available only in Zoom mode.)
Press V or v and press
and –5.
Vertical Size Allows you to adjust the vertical size of the picture. (Available
only in Zoom mode.)
Press V or v and press
and –5.
Select to enlarge the 4:3 picture, to fill the 16:9
screen, keeping the original image as much as
possible.
Select to return the 4:3 picture to normal
mode.
Select to enlarge the 4:3 picture horizontally
only, to fill the display area.
Select to enlarge the picture horizontally and
vertically to an equal aspect ratio that fills the
wide screen.
Select to continue using the current screen
mode setting when the channel or input is
changed.
to choose a correction between +5
to choose a correction between +5