MTS is available only for analog programs.
The MUTING button on your remote control is
available when Audio Out is set to Variable, and
becomes nonfunctional when set to Fixed.
This option can be set only when the Speaker option is set to Off.
Select for stereo reception when viewing a program
broadcast in stereo.
Select to automatically switch to second audio
programs when a signal is received. (If no SAP
signal is present, the TV remains in Stereo mode.)
Select for mono reception. (Use to reduce noise
during weak stereo broadcasts.)
Select to turn on the TV speakers.
Select to turn off the TV speakers and listen to the
TV's sound only through your external audio
The TV's speakers are turned off and the audio
output from your audio system can still be
controlled by the TV's remote control.
The TV's speakers are turned off, and the audio
output of the TV is fixed. Use your audio receiver's
volume control to adjust the volume (and other
settings) through your audio system.
Use this option to make adjustments to audio and
video synchronization when you have external
equipment connected to DIGITAL AUDIO
(OPTICAL ) OUT of the TV. Select Off (factory
default setting) to make no adjustments. Select 1, 2
or 3 to adjust so that the video and audio from your
connected external equipment are in synchronized.
Using the Settings