Adding Groups - Buffalo TeraStation User Manual

Adding Groups

1
2
Notes:
• Group names can contain up to 20 bytes (UTF-8). Do not use multi-byte characters. Alphanumeric characters,
-(hyphen), _(underscore), and .(dot) may be used. Do not use a symbol as the first character.
• Group descriptions can contain up to 75 bytes (UTF-8). Alphanumeric characters, multi-byte characters, -(hyphen),
_(underscore), and spaces may be used. Do not use space as the first character.
• You may register up to 300 groups with the TeraStation.
• Repetitive deletions and additions of groups may cause the quota feature to not work properly. Even though the data
is copied by the backup function of the TeraStation, the Quota feature may not work properly if a user ID/group ID is
duplicated. In such a case, use a user name/group name of an unused user ID or group ID.
• If the Group ID is left blank, a Group ID will be automatically assigned. When using the Quota feature, use numbers
between 1000 and 1999 to set a group ID manually. Make sure that a user ID does not duplicate to other users.
• To set a Quota for a group, check [Enable] for Group Quota, and enter the maximum disk space allotted in GB. Refer to
"TeraStation Hard Drive Operating Guide" for details.
1 Click [Users/Groups] - [Local Groups] in the Web Admin interface.
2 Click [Create Group].
1 Enter [Group Name] and [Description].
2 Select users who join a group, click [Add].
3 Click [Save].
22