Remote Control Setup & Basic Operation - Samsung SVR-3200 Install Manual

3.2.1.1 Character input dialog box
The characters input dialog lets you input text.
Character input
Use the cursor [▲/▼] and [◀/▶] keys to choose characters then press [Enter] to input it. Use
[ ] to backspace, and [ ] to insert a space. When finished, press [Enter] to exit the character
input dialog with the newly inputted value.
3.2.2 Remote control setup & basic operation
3.2.2.1 ID setup
When operating multiple units, a single remote controller can be used to control all of them by
assigning each unit a unique ID. Setup each unit's unique ID as follows.
(1) Press [MENU].
(2) Press [▶] to select "System Setup" then press [Enter] or [▼].
(3) Press [▼] to select "Setup" then press [Enter].
(4) Press [▶] to select "Remote Control ID" then press [Enter].
(5) Adjust the ID value using [◀/▶] then press [ESC].
(6) Press [ESC] several times until you are back in monitor mode.
21
Install Manual