Samsung SPD-2200 Series Operation Manual page 19

Camera setting
Sequence Setting
Set Preset
Pan Swing
Tilt Tilt Swing Swing
Swing Focus Mode MANUAL
Group SEQ
Tour SEQ
PTZ Trace
Power On Resume OFF
③ Tilt Swing
Activates and sets Swing monitoring in the Tilt direction and deletes data
·Setting
SSelects the preset swing position with the joystick and sets the position with the Enter key.
SPD is the speed with which the camera moves.(001~240° /sec)
DWL is the dwell time for the camera.(1~128sec)
Completes the setting by pressing the Enter key on the selected position.
·Execute
Starts swing monitoring.
Stops it with the Stop key.
·Clear
Deletes the swing data.
Notes
·For 0° Tilt in Wide mode, about a third of the object does not appear on the screen.
Some objects may appear whiter than the actual colors as a result of the AGC effect.
36
SPEED DOME CAMERA
Tilt Swing
Setting
Execute
Clear
Press the
Enter key
Sequence Setting
Set Preset
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL Swing Focus Mode
Group SEQ
Tour SEQ
PTZ Trace
Power On Resume
④ Swing Focus Mode
This mode is for activating the Auto Focus during continuous operation of Pan or Tilt Swing.
Note) Excessively fast Pan or Tilt Swing may disrupt the Auto Focus.
·AUTO/MANUAL
AUTO activates the Auto Focus.
Sequence Setting
Set Preset
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ Group SEQ
Press the
Tour SEQ
PTZ Trace
Power On Resume OFF
⑤ Group SEQ
Starts and sets Sequence monitoring and deletes the data. Registers up to 6 groups.
·Setting
Select the Preset Position to monitor using the joystick, and set the position using the Enter Key.
SPD is the speed with which the camera moves. (001~240°/sec)
DWL is the dwell time for the camera. (1~128sec)
Completes the setting by pressing the Enter key on the selected position.
·Execute
Starts Group monitoring.
Stops it with the Stop key.
·Clear
Deletes the group data.
OFF
Group SEQ
Group 1
Group 1
Group 2
Group 3
Group 4
Group 5
Group 6
Enter key
SPEED DOME CAMERA
37