Sound Mode - Sharp HT-SB602 Operation Manual

General control (continued)
 Display brightness control
Press the DIMMER button to adjust the brightness of the
display.
DIMMER 1
DIMMER 2
DIMMER OFF
 Volume auto fade-in
If you turn off and on the sound bar with the volume set
to 80 or higher, the volume starts at 40 and fades in to
the last set level.
 Volume control
Sound bar operation:
Press the VOLUME +
button to increase the
volume and the VOLUME –
button for decreasing.
Remote control operation:
Press the VOL + button to increase the volume and the
VOL – button to decrease the volume.
 Muting
The volume is muted temporarily when pressing the
(MUTE) button on the remote control. Press again to
restore the volume.
Note:
When the sound bar is turned off and back on again,
muting is cancelled.
 Sound Mode
Sound bar operation:
To change to a different mode, press the SOUND MODE
button repeatedly until the desired sound mode is
displayed.
Remote control operation:
Press the desired sound mode button.
CINEMA (for cinema sound effect)
MUSIC (for standard sound effect)
GAME (for game sound effect)
SPORT (for sport broadcasting)
NEWS (for news)
NIGHT (for night)
BYPASS (for fl at sound effect)
(Display is dim)
(Display gets dimmer)
(Display is bright)
.....
MIN
1 2 99
 Bass and Treble Control
Bass and Treble control is applicable during BYPASS
mode only.
Bass Control
1. Press the BASS button.
2. Within 5 seconds, press the VOL (+ or –) button to
adjust the bass.
Treble Control
1. Press the TREBLE button.
2. Within 5 seconds, press the VOL (+ or –) button to
adjust the treble.
 Subwoofer level control
The subwoofer level can be
adjusted.
To increase the level, press
the SW LEVEL
To decrease the level, press the SW LEVEL
Notes:
MAX
 When sound from the speaker is distorted, decrease
the subwoofer level.
 When changing the subwoofer level, the output level
of the subwoofer is also changed.
 AV SYNC level control
The AV SYNC level can be
adjusted.
To increase the level, press
the AV SYNC + button.
To decrease the level, press the AV SYNC – button.
 Speaker output selection (HDMI connection)
Press
SPEAKER" or "SB SPEAKER" appears on the display to
toggle sound output between this sound bar or TV.
 Function
HDMI 1 HDMI 2
Sound bar operation:
Press the INPUT button repeatedly to select the desired
input source.
Remote control operation:
Press the desired function button.
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or
the AC power lead becomes disconnected.
E-12
–5 –4
button.
0 +1
button on the remote control until "TV
TV ARC OPTICAL AUDIO IN
.....
+4 +5
button.
.....
+3
BLUETOOTH