Placing The System; Placing The Stand; System Connections - Sharp HT-SB602 Operation Manual

Placing the system

Installation image:
TV
Sound Bar
VCR DVD player
Place the system as shown.
Remove the protective fi lm covering the sound bar and
subwoofer before turn on the system.

System connections

Make sure to unplug the AC power lead before making any connections.
Subwoofer
Notes:
 The front panel of the sound bar is not removable.
 The transmission distance of the wireless signal
Caution:
 Do not change the installation direction when the
 Do not stand or sit on the sound bar and subwoofer as
 Do not allow any objects to fall into or to be placed in
 Placing the stand
Place the stand as shown.
Subwoofer
Wall socket
AC 220 - 240 V ~ 50/60 Hz
Wall socket
AC 220 - 240 V ~ 50/60 Hz
E-7
between the subwoofer and sound bar is about 10 m
(32 feet), but may vary depending on your operating
environment. If a steel-concrete or metallic wall is
between the subwoofer and the sound bar, the system
may not operate at all, because the wireless signal
cannot penetrate metal.
sound bar is turned on.
you may be injured.
the bass refl ex duct.
Stand
Sound Bar